Trimac Piping Solutions, Is a well-known and well-regarded source, manufacturer, supplier, and stockist of Alloy Steel Ring Type Joint Flanges. We manufacture RTJ flanges that are well-known for their high performance and are designed to satisfy client requirements. A machined metallic ring with a deep groove bored into its face is known as a Ring type joint flange (RTJ). The metal ring in this groove is crushed when the flange’s connecting bolts are tightened. This compression creates a tight-fitting, leak-proof seal on the pipe or connector. They give crucial pipeline and pressure vessel infrastructure a more effective sealing option. RTJ Flanges are the best choice when maximum surface sealing is required. These Flanges’ pressure classes range from 150 to 2500 pounds. They range in size from 1/2 to 48 inches.
Alloy Steel Ring type joint Flanges are commonly utilized in high-pressure (Class 600 or over) and high-temperature (above 427 degrees Celsius) applications. Lens Ring Seat Cutting and Polishing, ‘V’ Groove Cutting, and Tube Sheet Machining are some of the applications. These Flanges are used in a variety of industries, including Refineries, Gas Processing, Off-Shore Oil Drilling Companies, Petrochemicals, Hydro-Carbon, Fertilizers, Paper & Pulp Companies, Power Generation, Specialty Chemicals, Pharmaceuticals, Drugs, Steel, Cement, Water Pipe Line, Pesticides, General Piping, Construction, Engineering Nuclear, Food Processing & Dairy, boiler & heat exchangers, etc.
These Flanges are available in F1, F5, F9, F11, F22, and F91 Alloy Steel grades. We have all of these grades of Alloy Steel Ring Type Joint Flanges in stock, as well as several sizes and types, such as the Flat Faced Flanges, Raised Faced Flanges, Tongue Faced, Grooved Faced Flanges, and many more at the most competitive pricing. Trimac Piping Solutions, manufactures A-grade Alloy steel flanges with the highest quality raw materials and cutting-edge technology.
| Specification | ASTM A182 / ASME SA182 |
|---|---|
| Size Chart | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
| Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production Technique | Forged, Heat treated and machined |
| Connect Type/ Flange Face Type | Ring Type Joint (RTJ), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Manufacturer of | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. B.S: BS4504 , BS3293, BS1560, BS10 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276 |
| Grades | Alloy Steel F1, F5, F9, F11, F22, F91 |
| Steel Grades | UNS Designation | Steel Names |
|---|---|---|
| ASTM A182 F1 | K12822 | C-0.5Mo |
| ASTM A182 F2 | K12122 | 0.5Cr-0.5Mo |
| ASTM A182 F5 | K41545 | 5Cr-0.5Mo |
| ASTM A182 F5a | K42544 | 5Cr-0.5Mo |
| ASTM A182 F9 | K90941 | 9Cr-1Mo |
| ASTM A182 F10 | S33100 | 20Ni-8Cr |
| ASTM A182 F91 | K90901 | 9Cr-1Mo-V |
| ASTM A182 F92 | K92460 | 9Cr-0.5Mo-1.8W-V |
| ASTM A182 F11 CL1 | K11597 | 1.25Cr–0.5Mo–Si |
| ASTM A182 F11 CL2 | K11572 | 1.25Cr–0.25Mo–Si |
| ASTM A182 F11 CL3 | K11572 | 1.25Cr–0.5Mo–Si |
| ASTM A182 F12 CL1 | K11562 | 1Cr-0.5Mo |
| ASTM A182 F12 CL2 | K11564 | 1Cr-0.5Mo |
| ASTM A182 F22 CL1 | K21590 | 2.25Cr-1Mo |
| ASTM A182 F22 CL3 | K21590 | 2.25Cr-1Mo |
| ASTM A182 F21 | K31545 | 3Cr-1Mo |
| ASTM A182 F122 | K91271 | – |
| ASTM A182 F911 | K91061 | – |
| ASTM A182 F3V | K31830 | – |
| ASTM A182 F3VCb | K31390 | – |
| ASTM A182 F22V | K31835 | 2.25Cr-1Mo-V |
| ASTM A182 F23 | K41650 | – |
| ASTM A182 F24 | K30736 | 2.25Cr-1Mo-0.25V-Ti-B |
| ASTM A182 FR | K22035 | – |
| ASTM A182 F36 | K21001 | 1.15Ni-0.65Cu-Mo-Co |
About Us
Our fittings ensure that the pipeline lifelines of our industries are always perfectly suited. We at Trimac Piping Solutions consistently endeavor to manufacture fittings and flanges that are exceptional in quality, rich in material composition and made to perfection to endure forever.
Ground Floor, 192/4, Pavapuri Apartment, 9th Khetwadi Ln, near Reliance Hospital, Mumbai, Maharashtra 400004
+91 22 67496206
+91 8779185600 | +91 9833359757
© Copyright 2023 Trimac Piping Solutions Powered By YUGASMI
