To calculate the fluid flow velocity in a pipeline, orifice flanges and orifice meters are utilized. Pressure “Tappings” are typically machined on the orifice flange, typically on two sides, directly across from one another. This does away with the requirement for various orifice carriers or tube wall tappings. On orifice flanges, raised faces or RTJ (Ring Type Joint) facings are typical. With extra milling, they are equivalent to weld neck and slip-on flanges. To examine or repair the orifice plate and seals, the flanges are separated using this screw jack. When joining orifice flanges, specifications should be followed. The manufacturer’s assembly instructions should be followed for integrated flow measuring instruments.
The task of an Orifice Flange is to measure the rate at which goods pass through the piping system. ANSI B16.36 Orifice Flanges are easily identified by a hole bored perpendicular to the tube through the surface of the flange. They also have jackscrews, which are a progression of bolts. These screws are used to detach the flanges so that the orifice plate can be inspected and/ or replaced. The orifice flange union meeting is set up of just one component: the orifice flange. Two orifice flanges, an orifice plate, bolts, nuts, jacks, and two gaskets form the union of the orifice flange. Trimac Piping Solutions is the country’s top producer of Stainless Steel and Carbon Steel Orifice Flanges. Our goal is to produce the best items at costs that everyone can afford. We are the leading suppliers, manufacturers, and distributors of orifice flanges, and we can customize any of our offerings to your precise requirements.
| Size | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
|---|---|
| Standards | ANSI/ASME B16.36 |
| Pressure Rating ANSI | Class 150, Class 300, Class 400, Class 600, Class 900, Class1500, Class 2500 |
| Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production Technique | Forged, Heat treated and machined |
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF) |
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Material | Brass Orifice Flange, Stainless Steel Orifice Flange, Hastelloy Orifice Flange, Alloy 20 Orifice Flange, Copper Nickel Orifice Flange, Inconel Orifice Flange, Incoloy Orifice Flange, Duplex Steel Orifice Flange, Titanium Orifice Flange, SMO 254 Orifice Flange, Nickel Alloy Orifice Flange, Super Duplex Orifice Flange, AISI 4130 Orifice Flange, Monel Orifice Flange. |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
ANSI B16.36 orifice flare manufacturer in Mumbai, PED-CERTIFIED orifice flare manufacturer, ASME B16.36 orifice flare stockholder, and CLASS 300 orifice flare dealer in India
About Us
Our fittings ensure that the pipeline lifelines of our industries are always perfectly suited. We at Trimac Piping Solutions consistently endeavor to manufacture fittings and flanges that are exceptional in quality, rich in material composition and made to perfection to endure forever.
Ground Floor, 192/4, Pavapuri Apartment, 9th Khetwadi Ln, near Reliance Hospital, Mumbai, Maharashtra 400004
+91 22 67496206
+91 8779185600 | +91 9833359757
© Copyright 2023 Trimac Piping Solutions Powered By YUGASMI
