For Carbon Steel Socket Weld Flanges in India, Trimac Piping Solutions has long been the premier manufacturer, supplier, and stockist. These products are made to the highest standards. To ensure their excellent quality, these go through numerous tests. Although Carbon Steel Socket Weld Flanges appear to be slip-on flanges, the hole has been counter-bored to make room for the pipe. The inner diameter of the pipe’s pipe corresponds exactly to the size of the remaining bore. By using a fillet weld, the hub of the flanges is connected to the pipe. Like a slip-on flange, a carbon steel socket weld flange has an extra shoulder inside the borehole. Socket weld flanges are frequently employed in numerous applications. It is most frequently observed in high-pressure High-pressure systems like steam and hydraulic lines are where it is most frequently observed. When using carbon steel SWRF flanges, a pipe can be inserted into the socket of the flange and continued through the shoulder of the socket. Before being welded into the flange hub, the pipe is set back by 1.6mm from the flange’s shoulder.
The flange’s strength is increased by the inner weld. Socket weld flanges made of carbon steel A105 are frequently used on high-pressure pipe systems and pipes with smaller diameters, ranging from 1.27 to 10.16 cm. Socket-weld flanges made of carbon steel have several benefits. First is effective in high-stress, small-scale situations. It is 1.5 times more fatigue resistant than a slip-on flange while still having strength comparable to one. These are less likely to leak. For pipes with socket welds, beveling is not required. Butt-welded joints are simpler to install and don’t require any additional machining. Internal fractures in flanges can lead to crevice corrosion. These flanges have two welds, which boost their durability but make installation more difficult. Due to the increased use of welding, it is commonly practiced—though not advised—to only weld at the hub of the flange.
| Specification | ASTM A694 / ASME SA694 |
|---|---|
| Size Chart | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
| Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production Technique | Forged, Heat treated and machined |
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Manufacturer of | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. B.S: BS4504 , BS3293, BS1560, BS10 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276 |
| Grades | Carbon Steel LF2, A36, F65, F80, F60, A105, F52, F70, F42, IS2062 |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Best Price of Carbon Steel SWRF Flange, ANSI B 16.5 Class 150 Carbon Steel Socket Weld Flange, ASTM A694 F80 Socket Weld Flange, Class 300 Carbon Steel Socket Weld Flange, ASME B16.5 Carbon Steel Socket Weld Flange, Carbon Steel Industrial Socket Weld Flanges, ASME SA694 Carbon Steel F70 Socket Weld Flanges, Carbon Steel Socket Wel
» Stainless Steel Weld Neck Flanges
» Alloy Steel Welding Neck Flanges
» Carbon Steel Weld Neck Flanges
About Us
Our fittings ensure that the pipeline lifelines of our industries are always perfectly suited. We at Trimac Piping Solutions consistently endeavor to manufacture fittings and flanges that are exceptional in quality, rich in material composition and made to perfection to endure forever.
Ground Floor, 192/4, Pavapuri Apartment, 9th Khetwadi Ln, near Reliance Hospital, Mumbai, Maharashtra 400004
+91 22 67496206
+91 8779185600 | +91 9833359757
© Copyright 2023 Trimac Piping Solutions Powered By YUGASMI
