Carbon Steel Socket Weld Flanges

For Carbon Steel Socket Weld Flanges in India, Trimac Piping Solutions has long been the premier manufacturer, supplier, and stockist. These products are made to the highest standards. To ensure their excellent quality, these go through numerous tests. Although Carbon Steel Socket Weld Flanges appear to be slip-on flanges, the hole has been counter-bored to make room for the pipe. The inner diameter of the pipe’s pipe corresponds exactly to the size of the remaining bore. By using a fillet weld, the hub of the flanges is connected to the pipe. Like a slip-on flange, a carbon steel socket weld flange has an extra shoulder inside the borehole. Socket weld flanges are frequently employed in numerous applications. It is most frequently observed in high-pressure High-pressure systems like steam and hydraulic lines are where it is most frequently observed. When using carbon steel SWRF flanges, a pipe can be inserted into the socket of the flange and continued through the shoulder of the socket. Before being welded into the flange hub, the pipe is set back by 1.6mm from the flange’s shoulder.

The flange’s strength is increased by the inner weld. Socket weld flanges made of carbon steel A105 are frequently used on high-pressure pipe systems and pipes with smaller diameters, ranging from 1.27 to 10.16 cm. Socket-weld flanges made of carbon steel have several benefits. First is effective in high-stress, small-scale situations. It is 1.5 times more fatigue resistant than a slip-on flange while still having strength comparable to one. These are less likely to leak. For pipes with socket welds, beveling is not required. Butt-welded joints are simpler to install and don’t require any additional machining. Internal fractures in flanges can lead to crevice corrosion. These flanges have two welds, which boost their durability but make installation more difficult. Due to the increased use of welding, it is commonly practiced—though not advised—to only weld at the hub of the flange.

SPECIFICATION CHART OF CARBON STEEL SOCKET WELD FLANGES

Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175
Specification	ASTM A694 / ASME SA694
Size Chart	1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
Standards	ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Pressure Rating ANSI	Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN	6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
UNI	6Bar 10Bar 16Bar 25Bar 40Bar
EN	6Bar 10Bar 16Bar 25Bar 40Bar
Coating	Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Test Certificates	EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc
Production Technique	Forged, Heat treated and machined
Connect Type/ Flange Face Type	Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design	As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2″) to 200 NB (8″) Equal and Reducing Configurations
Test	Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment	Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Manufacturer of	ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange B.S: BS4504 , BS3293, BS1560, BS10 AS 2129: Table D; Table E; Table H ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48 ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 American standard (ANSI) German (DIN) British standard (BS) DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM A694 LF2 Carbon Steel Flanges The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Grades	Carbon Steel LF2, A36, F65, F80, F60, A105, F52, F70, F42, IS2062

A VARIETY OF SOCKET WELD FLANGES

STAINLESS STEEL SOCKET WELD FLANGES

ALLOY STEEL SOCKET WELD FLANGES